Know Your Vape

Notorious Mod Clone: Popular Vape Device Replica

By Know Your Vape · · Updated

notorious mod clone
Contents

The Notorious Mod Clone is a low-cost copy of the Notorious, a hybrid mechanical tube mod made for cloud chasing. Like other affordable alternatives, it copies a high-end design at a fraction of the cost.

Clone culture works the same way whether people chase copies of premium pedals for guitar or high-end mods for vaping. The copy is budget-friendly, but quality varies from maker to maker.

A hybrid mechanical mod is one of the least forgiving vaping devices. This guide covers how it works, how clones differ from the original, and the battery safety rules that matter most.

Key Takeaways

  • The Notorious clone is an unregulated hybrid mechanical mod with no protection circuit
  • Hybrid connections require atomizers with a protruding, insulated positive pin
  • Low-resistance cloud-chasing builds demand authentic high-drain batteries and careful math

Comprehensive Overview of the Notorious Mod Clone

The Notorious Mod clone copies a mechanical mod design built for cloud chasers. We could not find an official spec page for the original, so measurements and battery size should be checked on the clone you buy.

Key Features and Specifications

The Notorious uses a hybrid connection. Instead of a separate 510 connector with its own pin, the atomizer threads straight onto the tube and its positive pin presses directly on the battery.

Removing the 510 connector reduces voltage drop, so more of the battery's voltage reaches the coil. It also removes a safety buffer, as explained below.

Clone threads and contacts are usually copper or brass. Vent holes in the tube are meant to release gas if a battery fails.

Design and Build Quality

Clone bodies are usually stainless steel, brass or copper, often with knurling or engraving copied from the original.

Quality varies widely. Better clones have clean machining and smooth threads, while cheaper ones may have rough threads, soft springs or uneven finishes.

If your clone has a locking ring, use it whenever the mod is in a pocket or bag. A mech that fires by accident can overheat the battery and atomizer.

Hybrid Connector and Mechanical Mod Functionality

On a hybrid mod, the atomizer's positive pin touches the battery's positive terminal directly. The atomizer must have a protruding, properly insulated positive pin.

A flush or recessed pin can let the battery's positive terminal touch the atomizer's negative threads. That creates a hard short, which can make the battery vent or explode.

Check the pin before mounting any atomizer, and never assume an RDA is hybrid-safe because it fits the threads.

Mechanical mods have no electronic components or safety features. The mod fires whenever the button completes the circuit, so you must understand Ohm's law and battery limits before using one.

Comparison to the Authentic Notorious Mod

Authentic units were made in limited numbers and are scarce on the used market. We could not verify original or current prices.

Originals generally have tighter machining, smoother threads and a more consistent switch. Clones vary from close copies to poorly made units.

Key Differences:

  • Price: Clones cost far less than originals
  • Materials: Originals generally use higher-grade metals and plating
  • Threading: Tighter tolerances on original mods
  • Switch: More consistent action on originals
  • Markings: Serial numbers usually appear only on genuine products

A well-made clone can perform close to the original electrically. A poorly made one can have weak contacts or insulators that make it unsafe.

Collaboration with Cloud Kicker Society and Aether Tech

The original Notorious is commonly credited to a collaboration between Cloud Kicker Society and Aether Tech, the maker associated with the Plume Veil RDA. We could not confirm the details from an official source.

Its limited production made authentic units hard to find, which helped clones spread.

Performance for Cloud Chasers

Cloud chasers like hybrid mechs because low voltage drop delivers more power to very low-resistance builds. That power comes straight from the battery, with nothing to limit it.

Current equals voltage divided by resistance. A fully charged cell at 4.2V on a 0.15 ohm build draws about 28 amps, and a 0.1 ohm build draws about 42 amps, beyond the continuous rating of most single cells.

Check your battery's continuous discharge rating (CDR) from a trusted source, and keep every build within it with a safety margin. Measure each build with an ohm reader before firing.

The FDA advises replacing damaged or wet batteries and storing loose batteries in a case away from metal objects. Replace any cell with a torn wrap before use.

Extended firing heats the battery and mod. Stop and let it cool if the tube gets hot.

Included Accessories and Plume Veil RDA

Many Notorious clone kits have been sold with a Plume Veil RDA clone. The Plume Veil is a rebuildable dripping atomizer with a build deck sized for cloud-chasing coils.

Clone kit contents vary by seller, but often include:

  • The RDA with adjustable airflow
  • A wide-bore drip tip
  • Spare O-rings and screws
  • A small tool for adjustments

Before using any RDA on a hybrid mod, confirm its positive pin protrudes and is insulated.

Availability and Pricing Options

Notorious clones have been sold by online vape retailers, alone or as kits with an RDA. We could not verify current prices or which sellers still stock them.

Clone designs come and go, and several makers' versions with different quality levels have existed.

In the US, it is illegal for retailers to sell any tobacco product, including vapes, to anyone under 21.

Sources

More in Vape Devices