TC Deviate Mod Clone: an Affordable Alternative

Deviate Mod Clone
Contents

A TC Deviate mod clone is a lower-cost copy of the Deviate, an older box mod built around Evolv's DNA 40 temperature control chip. Clones copy the look and basic features, usually without the genuine Evolv board.

Clone makers don't publish reliable specs, and quality varies from batch to batch. This guide covers what the original offered, what to check on a clone, and how to use it safely.

If you're learning the basics of mod behavior and device output, understanding what a blinker vape is can help newer users transition more confidently into temperature control devices like the TC Deviate.


Key Takeaways

  • The original Deviate used Evolv's DNA 40 chip, with up to 40W and temperature control for Ni200 nickel coils.
  • Clones rarely use a genuine Evolv board, so output, temperature accuracy and safety protections can differ.
  • Clones have no official support or warranty, so inspect the unit and use only suitable batteries.

Overview of the TC Deviate Mod Clone

The TC Deviate clone copies the shape and controls of the original Deviate DNA40. It is a regulated box mod, which means a chip controls power to the coil.

We could not find an official spec sheet for any Deviate clone. Treat seller listings with caution and check the details on the unit you receive.


Key Features and Specifications

The genuine Deviate's specs come from its chip. Evolv's DNA 40 page lists 1 to 40W of output, 1 to 9V, and a temperature range of 200 to 600°F (93 to 315°C).

The DNA 40's temperature control supports Ni200 nickel wire only. Evolv also lists coil preheat, a 128 x 32 OLED screen, and low resistance, short circuit, overheat and low voltage protection.

A clone may use a different chip. It may support other coil wires, or it may lack some of these protections, so check the manual that comes with your unit.


Design and Aesthetics

We could not verify the clone's dimensions, weight, chassis material or color options from an official source. Listings vary, and clones from different makers may differ.

Branding on clones is usually changed from the original. Check that the screen is readable, the buttons respond cleanly and the 510 pin sits flush.


Comparison With the Original Deviate Mod

The genuine Deviate used a real Evolv DNA 40 board. Evolv now lists the DNA 40 under its old products, so originals are mostly found secondhand.

A clone usually costs less, but you trade away the genuine chip, quality control and any manufacturer support. Temperature accuracy depends on the chip the clone actually uses.

Clones lack official support and warranty coverage. If the device fails, you will likely need to replace it.


Buying and Using the TC Deviate Mod Clone

Buy only from sellers who show clear photos and list the chip, battery type and output range. Prices and stock change often, so compare listings before you buy.

Vape products can only be sold to adults 21 and over in the US. If you don't already smoke or vape, don't start.


Where to Buy: Retailers and Pricing

We could not verify current prices or which retailers still stock this clone. Check that the seller states the battery type and chip, and that it offers returns.

In the US, the Postal Service won't carry vape devices, parts or e-liquids, so buy from a seller that ships legally through a private carrier.


Performance and User Experience

Temperature control works only when the coil wire matches what the chip supports. On the genuine DNA 40, that means Ni200 nickel; use Kanthal or other wires in wattage mode instead.

Expect temperature accuracy and firing speed to vary between clones. Start at low settings and raise them slowly.

If you want to compare the TC Deviate with another popular clone, the Adamantium X Box Mod clone offers similar power handling and build characteristics.


Material Construction and Durability

Check whether your unit takes a single 18650 battery or another cell before you buy batteries. Use only batteries recommended for the device, from a reputable brand.

Follow the FDA's vape battery safety tips: don't mix battery brands, charge levels, or old and new batteries. Charge on a clean, flat surface where you can see the device.

Replace any battery with a torn wrap or dents, and carry spare batteries in a case so they can't touch keys or coins. Inspect the battery door and buttons regularly for wear.

Sources